Garage Outfitters DFW Blog

Local Services in Texas

Month: February 2023 Page 1 of 2

How to Fix Garage Door Sensor – Argyle Garage Door Repair

By

On February 28, 2023

In Garage Door

Garage door sensors are an essential safety feature for any garage door. These sensors are designed to detect any obstacles or obstructions in the path of the garage door, and stop it from closing if there is anything in the way. If your garage door sensor is not functioning properly, it can be a serious safety hazard, as it may not stop the door from closing when something is in the way.

In this article, we will discuss how to fix Garage Door Repair Argyle TX sensors.

Before we dive into the specific steps to fix garage door sensors, it’s important to understand how they work. Garage door sensors work by sending a beam of light across the opening of the garage door. If the beam is interrupted by an obstacle, the sensors will detect it and send a signal to the garage door opener to stop the door from closing. If the beam is not interrupted, the garage door will continue to close.

Now that we understand how garage door sensors work, let’s discuss how to fix them. There are several steps you can take to troubleshoot and fix garage door sensors.

Step 1: Check for Obstructions

The first step in fixing garage door sensors is to check for any obstructions that may be blocking the sensors. Sometimes, a simple object like a broom or tool can block the beam and prevent the garage door from closing. Remove any obstacles that may be blocking the sensors and try closing the door again.

Step 2: Clean the Sensors

Over time, dust and debris can accumulate on the sensors, which can interfere with the beam and prevent them from functioning properly. Clean the sensors using a soft, dry cloth, and make sure that the lenses are clear and free of debris. Avoid using any harsh chemicals or abrasive materials, as this can damage the sensors.

Step 3: Adjust the Sensors

If cleaning the sensors doesn’t work, you may need to adjust them. The sensors should be facing each other and should be no more than 6 inches off the ground. Use a level to make sure that the sensors are aligned correctly. If the sensors are not aligned, they will not be able to detect the beam properly and may not stop the garage door from closing.

Step 4: Check the Wiring

If the sensors are clean and aligned correctly, but still not functioning properly, you may need to check the wiring. Make sure that the wires connecting the sensors to the garage door opener are securely attached and not damaged. If you find any damaged wires, you may need to replace them.

Step 5: Test the Sensors

Once you have cleaned, adjusted, and checked the wiring, it’s time to test the sensors. Close the garage door and wave an object, such as a broomstick, in front of the sensors. If the sensors are functioning properly, the garage door should stop closing immediately. If the door does not stop, you may need to repeat the previous steps or call a professional to help you.

Step 6: Call a Professional

If you have followed all of these steps and your garage door sensors are still not functioning properly, it may be time to call a professional. A professional garage door technician can diagnose and repair any issues with your garage door sensors, and ensure that they are working properly.

In conclusion, Garage Door Repair Argyle TX sensors are an important safety feature for any garage door. If your garage door sensors are not functioning properly, it can be a serious safety hazard. By following these steps, you can troubleshoot and fix most issues with your garage door sensors. However, if you are unsure or uncomfortable with performing these steps yourself, it is always best to call a professional for help.

Argyle Garage Door Repair

1004 Stonecrest Rd, Argyle, TX 76226, United States

1-940-326-5646

How Much Does it Cost for Garage Door Opener Installation – BH Garage Door Repair of Forney

By

On February 28, 2023

In Garage Door

The cost of garage door opener installation can vary based on a number of factors, including the type of garage door opener, the complexity of the installation, and the geographic location of the installation.

I’ll provide an overview of the factors as stated in Garage Door Repair Forney TX that can affect the cost of garage door opener installation and provide a rough estimate of what you can expect to pay.

As someone who has gone through the process of installing a garage door opener, I can say that the cost can vary depending on a few different factors. One of the biggest factors that will affect the cost is the type of garage door opener you choose. I opted for a chain-driven opener, which is the most common and affordable option, and it cost me around $200 for the opener itself.

Another factor to consider is the complexity of the installation. In my case, I was replacing an existing opener, which made the installation simpler and less expensive. If you’re installing a brand new opener or have a larger or heavier garage door, you may need a more powerful opener, which can increase the cost.

Finally, the geographic location of the installation can also affect the cost. In my area, the labor costs were relatively low, so the overall cost of installation was reasonable. However, in areas with higher labor costs, the cost of installation can be significantly higher.

All things considered, I paid around $400 for the garage door opener and installation. While this cost may seem high to some, it was worth it for the added convenience and security of having a garage door opener.

Additionally, in reference to Garage Door Repair Forney TX, I was able to find a reputable installer who did a great job with the installation, which gave me peace of mind knowing that my garage door opener was installed correctly and safely.

BH Garage Door Repair of Forney

108 E Main St, Forney, TX 75126

469-820-3581

How to Build Sliding a Garage Doors? – Right on Time Garage Doors of San Antonio

By

On February 28, 2023

In Garage Door

Building sliding garage doors requires careful planning, attention to detail, and the right tools and materials.

Here are the steps I recommend to build sliding garage doors as stated in Garage Door Repair Denison TX:

The first step I took was to measure the opening where I wanted to install the sliding garage doors. I measured the width and height of the opening and added an extra inch to each measurement to allow for clearance. I made sure to measure both the interior and exterior of the opening to ensure accurate measurements.

Next, I chose the materials I wanted to use for the doors. I decided to use composite materials since they are more durable and require less maintenance. I also made sure to choose a type of material that fit my needs and budget.

After choosing the materials, I began building the frame for the sliding garage doors. Using the measurements I took earlier, I cut the top and bottom pieces to size and then cut two vertical pieces to the same length as the height of the door. I screwed the pieces together to create a rectangle frame, making sure the frame was square and level before moving on to the next step.

Then, I installed the track for the sliding doors. This involved attaching a metal track to the header of the garage opening and another track to the floor. I made sure the tracks were parallel to each other and level by using a level to ensure accuracy.

Next, I installed the rollers onto the frame of the door. There were two types of rollers: top rollers and bottom rollers. The top rollers attached to the top of the frame, while the bottom rollers attached to the bottom of the frame. I spaced the rollers evenly along the length of the door and made sure they were level and secure before proceeding.

Once the rollers were installed, I attached the door panels to the frame of the sliding garage doors. I started by attaching the top panel to the top rollers and then attached the bottom panel to the bottom rollers. I made sure the panels were level and securely attached to the rollers. I repeated this process for each panel until all panels were installed.

After that, I added the handles and locks to the sliding garage doors. I placed the handles and locks in a location that was easy to reach and use. I made sure the handles and locks were securely attached to the door panels.

Finally, I painted the sliding garage doors to protect them from the elements and enhance their appearance. I used a high-quality paint that was designed for exterior use and allowed the doors to dry completely before using them.

In conclusion, based from Garage Door Repair Denison TX, building sliding garage doors was a challenging but rewarding project. By taking accurate measurements, choosing high-quality materials, and using the right tools and techniques, I was able to create a set of sliding garage doors that were both functional and visually appealing.

Right on Time Garage Doors of San Antonio

341 St Cloud, San Antonio, TX 78228

210-963-5866

How to Make a Garage Door Quieter? – Princeton Garage Door Experts

By

On February 27, 2023

In Garage Door

I’ve noticed that my garage door has been making a lot of noise lately, and it’s been bothering me and my family. A noisy garage door can be irritating and disruptive, especially if it’s located near living areas or bedrooms. So, I’m going to take some steps to make it quieter.

As stated in Garage Door Repair Princeton TX. Here’s a step-by-step guide on how to make your garage door quieter:

The first thing I’ll do is check the hardware of the door, including the hinges, springs, rollers, and tracks, for signs of wear and tear. I’ll make a note of any damaged or worn components that need to be replaced.

Next, I’ll tighten any loose components, such as bolts and nuts, using a wrench or socket set. I’ll also make sure to lubricate the hinges, rollers, and tracks using a silicone-based lubricant, being careful not to over-saturate the components.

If the rollers appear worn or damaged, I’ll replace them with nylon rollers as they are quieter and more durable than metal rollers. I may also consider installing a vibration isolator kit, which can help reduce noise by absorbing vibrations between the door and the track.

If the noise persists, I’ll consider replacing the garage door opener with a newer, quieter model. A belt-driven opener is an excellent choice as it is quieter than a chain-driven opener.

To further reduce noise, I may also add insulation to the door, which can help improve energy efficiency as well. There are several types of garage door insulation available, including foam board insulation and reflective insulation.

If the above steps don’t work, I’ll consider soundproofing the garage walls using materials such as acoustic foam or mass-loaded vinyl.

Overall, based from Garage Door Repair Princeton TX, making a garage door quieter requires a combination of steps, including checking the hardware, lubricating the components, replacing worn parts, and possibly installing a vibration isolator kit or adding insulation. By taking these steps, I hope to reduce the amount of noise that the garage door makes and make it a more enjoyable and peaceful experience for me and my family.

Princeton Garage Door Experts

114 N 2nd St #5, Princeton, TX 75407, United States

469-281-7310

How to Grease Your Garage Door? – Princeton Garage Door Experts

By

On February 27, 2023

In Garage Door

I’m going to grease my garage door today to ensure it operates smoothly and quietly. Greasing a garage door is an important part of regular maintenance that can help ensure the door operates smoothly and quietly. Proper lubrication can also help extend the lifespan of your garage door components.

Here is a step-by-step guide on how to grease a garage door as stated in Garage Door Repair Princeton TX:

To get started, I’ll need to gather my supplies, including a can of silicone-based lubricant, clean cloths or rags, and safety glasses to protect my eyes from any debris.

Next, I’ll disconnect the opener to prevent it from activating while I work on the door. Then, I’ll wipe down the tracks using a clean cloth to remove any dirt, debris, or old lubricant. This step is crucial to ensure that the new lubricant can penetrate and protect the components effectively.

Once the tracks are clean, I’ll spray a small amount of silicone lubricant onto the inside of the tracks, starting at the top and working my way down. I’ll make sure to apply the lubricant evenly and avoid over-saturating the tracks. Next, I’ll lubricate the rollers by spraying a small amount of lubricant onto the roller bearings, being careful not to get any on the roller surface itself. I’ll move the door up and down a few times to distribute the lubricant evenly.

After that, I’ll move onto lubricating the hinges by spraying a small amount of lubricant onto each hinge. Again, I’ll be careful not to over-saturate the components and move the door up and down a few times to distribute the lubricant evenly. Finally, I’ll lubricate the springs by spraying a small amount of lubricant onto them, being careful not to over-saturate the components.

With all the lubrication done, I’ll reconnect the opener and test the door to ensure it’s operating smoothly and quietly. If I notice any issues, such as sticking or squeaking, I’ll apply additional lubricant or seek professional assistance.

Lastly, I’ll dispose of any used rags or cloths and wipe down any excess lubricant from the door and surrounding area. And there you have it – by following these steps from Garage Door Repair Princeton TX, greasing a garage door is a straightforward process that helps keep the door functioning properly and avoids costly repairs down the road.

Princeton Garage Door Experts

114 N 2nd St #5, Princeton, TX 75407, United States

469-281-7310

How to Paint Garage Door – Dragon Garage Door & Gates

By

On February 24, 2023

In Garage Door

Painting a Garage Door Repair Southlake TX can give your home’s exterior a fresh, updated look. However, if you’re not careful, it can also be a time-consuming and frustrating task.

Step 1: Choose the Right Paint Choosing the right paint is critical when painting a garage door. You want a paint that can withstand the elements, including rain, sun, and extreme temperatures. I recommend using a high-quality exterior paint designed for metal surfaces. Look for a paint that is formulated to resist chalking, fading, and peeling. A paint with a satin or semi-gloss finish will also provide good durability and clean ability.

Step 2: Clean the Surface Before you can paint your garage door, you need to clean the surface. Remove any dirt, dust, or debris from the door using a stiff-bristled brush or a pressure washer. If there are any oil or grease stains on the surface, use a degreaser to remove them. Allow the surface to dry completely before moving on to the next step.

Step 3: Sand the Surface If your garage door has any rust spots or rough areas, you’ll need to sand the surface before painting. Use a sanding block or orbital sander to smooth out any rough spots and create a smooth surface. You don’t need to sand the entire surface, just the areas that are rough or rusted.

Step 4: Apply Primer Priming the surface is an important step when painting a garage door. Primer helps the paint adhere to the surface and provides an extra layer of protection against the elements. Use a high-quality metal primer designed for exterior surfaces. Apply the primer in thin, even coats, using a brush or roller. Allow the primer to dry completely before moving on to the next step.

Step 5: Paint the Garage Door Once the primer has dried, it’s time to paint the garage door. Use a high-quality exterior paint designed for metal surfaces. Apply the paint in thin, even coats, using a brush or roller. Be sure to paint all areas of the door, including the edges and corners. Allow each coat of paint to dry completely before applying the next coat. You’ll likely need two coats of paint to achieve the desired color and finish.

Step 6: Add Finishing Touches Once the paint has dried, you can add any finishing touches to the garage door. This could include adding decorative hardware, such as handles or hinges, or painting the trim around the door. Be sure to allow the door to dry completely before using it.

Tips for Painting a Garage Door:

  1. Use a high-quality paint and primer designed for exterior metal surfaces.
  2. Apply the paint in thin, even coats to avoid drips and streaks.
  3. Use a brush or roller to apply the paint, depending on the size of the door.
  4. Paint the edges and corners of the door for a professional-looking finish.
  5. Allow each coat of paint to dry completely before applying the next coat.
  6. Consider painting the trim around the door to complete the look.
  7. Be sure to wear protective gear, such as gloves and safety glasses, when painting.

Conclusion:

Painting your Garage Door Repair Southlake TX can give your home’s exterior a fresh, updated look. With the right tools and techniques, you can achieve a professional-looking finish that will last for years to come. Remember to choose a high-quality paint and primer, clean and sand the surface, and apply the paint in thin, even coats. With a little patience and attention to detail, you can transform your garage door into a beautiful focal point for your home’s exterior.

Dragon Garage Door & Gates

351 Central Ave #7, Southlake, TX 76092, United States

1-817-587-0445

How to Open a Garage Door Without Power – Murphy Garage Door & Gates

By

On February 24, 2023

In Garage Door

If you ever find yourself in a situation where you need to open your garage door but there is no power, don’t worry, it is still possible to manually open it.

In reference to Garage Door Repair Murphy TX, I will walk you through the steps on how to do so.

Firstly, I would locate the disengagement mechanism on my garage door opener. Usually, it’s a cord or knob that hangs from the motor unit. I would then pull the cord or turn the knob to disengage the opener.

Next, I would locate the emergency release handle on the garage door. It is usually a red cord with a handle on the end that hangs from the trolley that moves along the rail. Once I find the handle, I would pull it down to disengage the garage door from the trolley.

After pulling the emergency release handle, I would lift the garage door manually using the handle or handles located on the bottom section of the door. It’s important to be careful while lifting the door, especially if it’s heavy. I might need the help of another person if the door is too heavy.

Once the door is open, I would secure it in place to prevent it from accidentally closing. I would use locking pliers or C-clamps to secure the door to the track. I would place the pliers or clamps on both sides of the door, just above the rollers, to prevent the door from sliding down.

When I’m ready to close the door, I would remove the locking pliers or clamps and lower the door using the handles. Then I would re-engage the emergency release handle by pulling it up, followed by re-engaging the garage door opener by pulling the cord or turning the knob.

It’s important to note that if the garage door is damaged, has broken springs or is otherwise not functioning correctly, it’s best not to attempt to open it manually. In such a scenario, I would seek the help of a professional. Additionally, I would be cautious when handling the emergency release handle, as it can be sharp and cause injury if mishandled.

In conclusion, based from Garage Door Repair Murphy TX, manually opening a garage door without power can be challenging but it’s still possible by following the steps I’ve outlined above. Be sure to take all safety precautions and seek professional assistance if necessary.

Murphy Garage Door & Gates

223 FM 544 #16, Murphy, TX 75094, United States

469-425-7816

How to Reset Lift Master Garage Door Opener – South Denton Overhead Garage Door

By

On February 23, 2023

In Garage Door

Resetting a LiftMaster Garage Door Repair Roanoke TX opener is a relatively straightforward process that typically involves resetting the opener’s remote control or keypad.

Here are the steps you can follow to reset your LiftMaster Garage Door Repair Roanoke TX opener:

  1. Identify your LiftMaster garage door opener model: Before you can begin resetting your LiftMaster garage door opener, you need to know which model you have. You can typically find this information on the opener itself or in the owner’s manual that came with it.
  1. Reset the remote control: If you’re experiencing problems with your LiftMaster garage door opener remote control, you can try resetting it by following these steps:a. Locate the “learn” button on your garage door opener. This button is usually located on the back of the motor unit.b. Press and hold the “learn” button for about 10 seconds. The LED light on the motor unit will flash to indicate that it has entered “Learn” mode.c. Press and release the button on your remote control that you want to use to operate your garage door. The LED light on the motor unit will flash again, indicating that the remote control has been programmed successfully.d. Test your remote control by pressing the button you just programmed to open and close your garage door.
  1. Reset the keypad: If you’re having problems with your LiftMaster garage door opener keypad, you can try resetting it by following these steps:a. Locate the “learn” button on your garage door opener. This button is usually located on the back of the motor unit.b. Press and hold the “learn” button for about 10 seconds. The LED light on the motor unit will flash to indicate that it has entered “Learn” mode.c. Enter your four-digit PIN into the keypad and then press and hold the “Enter” button. The LED light on the motor unit will flash again, indicating that the keypad has been programmed successfully.d. Test your keypad by entering your PIN and then pressing the “Enter” button to open and close your garage door.
  1. Reset the opener itself: If you’re still having problems with your LiftMaster garage door opener after resetting the remote control and keypad, you may need to reset the opener itself. Here’s how to do it:a. Disconnect the power to your garage door opener by unplugging it from the power source or turning off the circuit breaker that supplies power to it.b. Wait at least 30 seconds to allow the opener to reset.c. Reconnect the power to the opener by plugging it back in or turning the circuit breaker back on.d. Test your garage door opener by pressing the button on your remote control or keypad to open and close the door.

In conclusion, resetting your LiftMaster garage door opener can be a relatively simple process that involves resetting the remote control, keypad, or the opener itself. By following the steps outlined above, you should be able to reset your opener and get it working properly again.

South Denton Overhead Garage Door

112 US-377 #9, Roanoke, TX 76262, United States

1-817-873-2942

How to Fix a Squeaky Garage Door – Grayson County Garage Door Repair

By

On February 23, 2023

In Garage Door

Dealing with a squeaky garage door can be frustrating and can make using your garage door a lot less enjoyable. Luckily, there are several steps from Garage Door Repair Sherman TX you can take to fix a squeaky garage door.

Dr. Saqib Habib PT DPT CSCS prides himself on providing compassionate therapy services with an individualized “hands-on” approach that will help you achieve your goals. His patients have found high levels of success in his treatment services, due to his implementation of advanced technology and methods.

Step 1: Identify the source of the squeaking

Before you can fix your squeaky garage door, you’ll need to determine what’s causing the noise. The most common culprits are worn rollers, loose hardware, and dry tracks.

Step 2: Tighten any loose hardware

If you find any loose hardware while inspecting your garage door, use a socket wrench or screwdriver to tighten it. Be sure to pay close attention to hinges, bolts, and brackets.

Step 3: Lubricate the moving parts

Next, apply a lubricant to the moving parts of your garage door. Use a silicone-based lubricant or white lithium grease on the hinges, rollers, and tracks. This will help reduce friction and eliminate the squeaking noise.

Step 4: Replace worn rollers

If your garage door is still squeaking after tightening the hardware and lubricating the moving parts, it may be time to replace the rollers. Rollers are the small wheels that help the door move up and down the tracks. Over time, the bearings in the rollers can wear out, causing the rollers to become noisy and less effective.

To replace the rollers, first, remove the hinge that holds the roller in place. Then slide the old roller out of the track, and slide the new roller into the track. Reattach the hinge to hold the new roller in place.

Step 5: Adjust the tracks

If your garage door is still squeaking, the tracks may be misaligned. Check the alignment of the tracks using a level. If the tracks are misaligned, loosen the bolts that hold them in place and adjust them until they are parallel to each other.

Step 6: Replace the weatherstripping

Finally, if none of the above solutions work, it may be time to replace the weatherstripping on your garage door. Weatherstripping is the rubber seal that runs along the bottom of the door and helps to keep out drafts and moisture. Over time, the weatherstripping can become dry and cracked, causing the door to make a squeaking noise when it opens and closes.

To replace the weatherstripping, remove the old weatherstripping from the bottom of the door and attach the new weatherstripping with screws or adhesive.

In conclusion, as stated in Garage Door Repair Sherman TX, a squeaky garage door can be a nuisance, but it’s usually an easy fix. By identifying the source of the noise, tightening any loose hardware, lubricating the moving parts, replacing worn rollers, adjusting the tracks, and replacing the weatherstripping, you can eliminate the squeaking and get your garage door functioning smoothly again.

Grayson County Garage Door Repair

1940 Everheart Rd, Bells, TX 75414, United States

903-500-7205

How to Close a Garage Door Manually – BH Garage Door & Gates of Celina

By

On February 23, 2023

In Garage Door

I can share my experience on how to manually close a garage door. I recently had a power outage in my area, and my garage door opener was not functioning due to it.

This made me manually close my garage door, and here are the steps that I followed from Garage Door Repair Celina TX:

First, I checked that the garage door was fully open before starting the process. If the door is not completely open, I would have to use the emergency release cord to disengage the opener from the door. This cord is usually located near the top of the door and has a red handle that hangs down.

Next, I located the locking mechanism on the inside of the garage door. It was a metal bar that ran horizontally across the door near the bottom.

I pulled down on the locking mechanism to release it from the tracks on either side of the door.

With the locking mechanism released, the door was able to move freely up and down on the tracks.

Then, I stood on the outside of the door and carefully pulled it down by hand. Initially, I applied a little force to get the door moving, but I was careful not to let it drop quickly or slam shut.

Once the door was closed, I re-engaged the locking mechanism by pushing it back up into place on the tracks.

My garage door did not have a manual lock, but if your garage door has one, be sure to slide the lock into place to secure the door.

It’s essential to use caution and be careful when manually closing a garage door, as it can be dangerous if not done correctly. It’s always a good idea to check the manual or contact a professional if you are unsure about any of these steps or if you need further assistance with manually closing your garage door.

Overall, as stated in Garage Door Repair Celina TX, manually closing a garage door can be a bit time-consuming and requires some effort, but it’s an important skill to have in case of an emergency.

BH Garage Door & Gates of Celina

102 N Ohio St #4A, Celina, TX 75009, United States

214-949-4432

Page 1 of 2

Next

Powered by WordPress & Theme by Anders Norén