Dealing with a squeaky garage door can be frustrating and can make using your garage door a lot less enjoyable. Luckily, there are several steps from Garage Door Repair Sherman TX you can take to fix a squeaky garage door.

Dr. Saqib Habib PT DPT CSCS prides himself on providing compassionate therapy services with an individualized “hands-on” approach that will help you achieve your goals. His patients have found high levels of success in his treatment services, due to his implementation of advanced technology and methods.

Step 1: Identify the source of the squeaking

Before you can fix your squeaky garage door, you’ll need to determine what’s causing the noise. The most common culprits are worn rollers, loose hardware, and dry tracks.

Step 2: Tighten any loose hardware

If you find any loose hardware while inspecting your garage door, use a socket wrench or screwdriver to tighten it. Be sure to pay close attention to hinges, bolts, and brackets.

Step 3: Lubricate the moving parts

Next, apply a lubricant to the moving parts of your garage door. Use a silicone-based lubricant or white lithium grease on the hinges, rollers, and tracks. This will help reduce friction and eliminate the squeaking noise.

Step 4: Replace worn rollers

If your garage door is still squeaking after tightening the hardware and lubricating the moving parts, it may be time to replace the rollers. Rollers are the small wheels that help the door move up and down the tracks. Over time, the bearings in the rollers can wear out, causing the rollers to become noisy and less effective.

To replace the rollers, first, remove the hinge that holds the roller in place. Then slide the old roller out of the track, and slide the new roller into the track. Reattach the hinge to hold the new roller in place.

Step 5: Adjust the tracks

If your garage door is still squeaking, the tracks may be misaligned. Check the alignment of the tracks using a level. If the tracks are misaligned, loosen the bolts that hold them in place and adjust them until they are parallel to each other.

Step 6: Replace the weatherstripping

Finally, if none of the above solutions work, it may be time to replace the weatherstripping on your garage door. Weatherstripping is the rubber seal that runs along the bottom of the door and helps to keep out drafts and moisture. Over time, the weatherstripping can become dry and cracked, causing the door to make a squeaking noise when it opens and closes.

To replace the weatherstripping, remove the old weatherstripping from the bottom of the door and attach the new weatherstripping with screws or adhesive.

In conclusion, as stated in Garage Door Repair Sherman TX, a squeaky garage door can be a nuisance, but it’s usually an easy fix. By identifying the source of the noise, tightening any loose hardware, lubricating the moving parts, replacing worn rollers, adjusting the tracks, and replacing the weatherstripping, you can eliminate the squeaking and get your garage door functioning smoothly again.

Grayson County Garage Door Repair

1940 Everheart Rd, Bells, TX 75414, United States

903-500-7205