I can share my experience on how to manually close a garage door. I recently had a power outage in my area, and my garage door opener was not functioning due to it.

This made me manually close my garage door, and here are the steps that I followed from Garage Door Repair Celina TX:

First, I checked that the garage door was fully open before starting the process. If the door is not completely open, I would have to use the emergency release cord to disengage the opener from the door. This cord is usually located near the top of the door and has a red handle that hangs down.

Next, I located the locking mechanism on the inside of the garage door. It was a metal bar that ran horizontally across the door near the bottom.

I pulled down on the locking mechanism to release it from the tracks on either side of the door.

With the locking mechanism released, the door was able to move freely up and down on the tracks.

Then, I stood on the outside of the door and carefully pulled it down by hand. Initially, I applied a little force to get the door moving, but I was careful not to let it drop quickly or slam shut.

Once the door was closed, I re-engaged the locking mechanism by pushing it back up into place on the tracks.

My garage door did not have a manual lock, but if your garage door has one, be sure to slide the lock into place to secure the door.

It’s essential to use caution and be careful when manually closing a garage door, as it can be dangerous if not done correctly. It’s always a good idea to check the manual or contact a professional if you are unsure about any of these steps or if you need further assistance with manually closing your garage door.

Overall, as stated in Garage Door Repair Celina TX, manually closing a garage door can be a bit time-consuming and requires some effort, but it’s an important skill to have in case of an emergency.

BH Garage Door & Gates of Celina

102 N Ohio St #4A, Celina, TX 75009, United States

214-949-4432