Garage door sensors are an essential safety feature for any garage door. These sensors are designed to detect any obstacles or obstructions in the path of the garage door, and stop it from closing if there is anything in the way. If your garage door sensor is not functioning properly, it can be a serious safety hazard, as it may not stop the door from closing when something is in the way.

In this article, we will discuss how to fix Garage Door Repair Argyle TX sensors.

Before we dive into the specific steps to fix garage door sensors, it’s important to understand how they work. Garage door sensors work by sending a beam of light across the opening of the garage door. If the beam is interrupted by an obstacle, the sensors will detect it and send a signal to the garage door opener to stop the door from closing. If the beam is not interrupted, the garage door will continue to close.

Now that we understand how garage door sensors work, let’s discuss how to fix them. There are several steps you can take to troubleshoot and fix garage door sensors.

Step 1: Check for Obstructions

The first step in fixing garage door sensors is to check for any obstructions that may be blocking the sensors. Sometimes, a simple object like a broom or tool can block the beam and prevent the garage door from closing. Remove any obstacles that may be blocking the sensors and try closing the door again.

Step 2: Clean the Sensors

Over time, dust and debris can accumulate on the sensors, which can interfere with the beam and prevent them from functioning properly. Clean the sensors using a soft, dry cloth, and make sure that the lenses are clear and free of debris. Avoid using any harsh chemicals or abrasive materials, as this can damage the sensors.

Step 3: Adjust the Sensors

If cleaning the sensors doesn’t work, you may need to adjust them. The sensors should be facing each other and should be no more than 6 inches off the ground. Use a level to make sure that the sensors are aligned correctly. If the sensors are not aligned, they will not be able to detect the beam properly and may not stop the garage door from closing.

Step 4: Check the Wiring

If the sensors are clean and aligned correctly, but still not functioning properly, you may need to check the wiring. Make sure that the wires connecting the sensors to the garage door opener are securely attached and not damaged. If you find any damaged wires, you may need to replace them.

Step 5: Test the Sensors

Once you have cleaned, adjusted, and checked the wiring, it’s time to test the sensors. Close the garage door and wave an object, such as a broomstick, in front of the sensors. If the sensors are functioning properly, the garage door should stop closing immediately. If the door does not stop, you may need to repeat the previous steps or call a professional to help you.

Step 6: Call a Professional

If you have followed all of these steps and your garage door sensors are still not functioning properly, it may be time to call a professional. A professional garage door technician can diagnose and repair any issues with your garage door sensors, and ensure that they are working properly.

In conclusion, Garage Door Repair Argyle TX sensors are an important safety feature for any garage door. If your garage door sensors are not functioning properly, it can be a serious safety hazard. By following these steps, you can troubleshoot and fix most issues with your garage door sensors. However, if you are unsure or uncomfortable with performing these steps yourself, it is always best to call a professional for help.

Argyle Garage Door Repair

1004 Stonecrest Rd, Argyle, TX 76226, United States

1-940-326-5646