Sealing your Garage Door Repair Plano TX from the inside is an effective way to improve insulation, weatherproofing, and energy efficiency in your garage. By properly sealing gaps and openings, you can prevent drafts, reduce outside noise, and keep out pests and debris.

Here’s a step-by-step guide on how to seal a garage door from the inside:

Tools and Materials You Will Need:

  • Garage door weatherstripping kit (includes top and side seals)
  • Bottom seal kit (if not included in the weatherstripping kit)
  • Caulk gun and weatherproof caulk
  • Utility knife or scissors
  • Measuring tape
  • Screwdriver
  • Pliers
  • Step ladder (if needed)
  • Safety glasses and gloves

Important Safety Precautions:

  • Wear safety glasses and gloves to protect yourself from sharp edges and debris.
  • Work carefully and avoid pinching your fingers in moving parts.

1. Inspect the Garage Door:

  • Carefully examine your garage door for any gaps, cracks, or openings that could allow air, water, pests, or debris to enter.

2. Choose the Right Weatherstripping:

  • Select a garage door weatherstripping kit that includes top and side seals. If your kit doesn’t include a bottom seal, purchase one separately.

3. Measure and Cut Weatherstripping:

3.1. Measure the Top and Sides:

  1. Measure the top width and the height of your garage door opening.
  2. Measure the sides of the opening from top to bottom.

3.2. Cut the Weatherstripping:

  1. Using a utility knife or scissors, cut the weatherstripping to match the measurements you took.

4. Install Top and Side Weatherstripping:

4.1. Clean the Surface:

  1. Wipe down the top and sides of the garage door opening to remove any dirt or debris.

4.2. Peel Off the Backing:

  1. Peel off the backing from the adhesive side of the weatherstripping.

4.3. Apply the Weatherstripping:

  1. Starting at the top center of the garage door opening, press the adhesive side of the weatherstripping against the door jamb.
  2. Continue pressing the weatherstripping down the sides, making sure it adheres securely.

4.4. Trim Excess Weatherstripping:

  1. Use a utility knife or scissors to trim any excess weatherstripping that extends beyond the sides.

5. Install Bottom Seal:

5.1. Close the Garage Door:

  1. Close the garage door to access the bottom edge.

5.2. Remove the Old Seal (If Necessary):

  1. If your garage door has an old or damaged bottom seal, remove it using pliers or a screwdriver.

5.3. Attach the Bottom Seal:

  1. Open the bottom seal kit and follow the manufacturer’s instructions to attach it to the bottom of the garage door.

6. Seal Gaps and Cracks:

6.1. Inspect for Gaps and Cracks:

  1. Check for any remaining gaps or cracks around the garage door.

6.2. Apply Weatherproof Caulk:

  1. Using a caulk gun, apply weatherproof caulk to seal any gaps or cracks around the door frame.

7. Test the Seal:

  • Close the garage door and observe whether there are any visible gaps or drafts. If needed, make adjustments to the weatherstripping or caulk.

8. Additional Tips:

  • Consider installing a garage door threshold seal to further prevent drafts and debris from entering under the door.
  • Regularly inspect and replace weatherstripping if it becomes damaged or worn over time.

9. Conclusion:

Sealing your Garage Door Repair Plano TX from the inside is a practical way to enhance insulation, weatherproofing, and energy efficiency. By following these steps and using the appropriate materials, you can effectively seal gaps and openings around the door, preventing drafts, pests, and debris from entering your garage. A well-sealed garage door also contributes to a more comfortable and functional space.

Plano Overhead & Garage Doors

Plano TX, United States

817-242-5042