I can guide you through the process of respooling a garage door cable. I want to remind you that this task can be dangerous, so please make sure you take all necessary safety precautions or call a professional if you are not comfortable performing it yourself.

As stated in Azle Garage Door, here’s how you can respool your garage door.

First, I gather all the necessary tools including a pair of pliers, a cable tension gauge, a winding bar, and a replacement cable if needed. Then, I release the tension on the cable by opening the garage door and disconnecting it from the opener. Using the pliers, I loosen the cable from the bottom bracket and remove any tension on the cable.

Next, I remove the old cable from the spool by unwinding it and removing it from the garage door. Then, I thread the new cable through the pulley and attach it to the bottom bracket. Slowly and evenly, I wind the new cable onto the spool making sure it does not cross over itself.

To check the cable tension, I use the cable tension gauge and adjust it according to the manufacturer’s specifications which can be found in the user manual. Next, I wind the cable onto the spool using the winding bar, starting at the bottom of the spool in a tight, even pattern while ensuring that the cable stays taut.

Finally, I test the garage door to make sure it functions properly. If it still doesn’t work correctly, it may be necessary to adjust the cable tension or call a professional for assistance.

In summary, based from Azle Garage Door, respooling a garage door cable requires proper tools, knowledge, and safety precautions. It can be dangerous, so make sure to take all necessary precautions or call a professional if you are not comfortable performing the task yourself. By following these steps, you can safely respool a garage door cable and ensure that your garage door functions properly.

Garage Door Experts of Azle

328 W Main St., Azle, TX 76020

817-646-8862