Programming a Hyundai Acclaim Garage Doors Scottsdale AZ opener involves a series of steps to synchronize the opener with your garage door. While the specific instructions may vary slightly depending on the model of your Hyundai vehicle and the type of garage door opener you have, the general process remains similar.

In this guide, we will outline the steps to program a Hyundai garage door opener. Please note that it’s always advisable to consult your vehicle’s owner’s manual for detailed instructions specific to your model.

Step 1: Clear Existing Codes Before programming a new code, it’s important to clear any existing codes from your vehicle’s memory. This prevents any interference during the programming process. To clear existing codes, follow these steps:

  1. Ensure your vehicle is parked outside the garage, within range of the garage door opener.
  2. Locate the garage door opener buttons in your Hyundai vehicle. These are usually located on the overhead console or the driver’s sun visor.
  3. Press and hold the first and third buttons simultaneously until the indicator light begins to blink rapidly. This usually takes around 20 seconds. Release both buttons.

Step 2: Prepare Your Garage Door Opener To program your garage door opener, you will need to access the “learn” or “program” button on your garage door opener motor unit. This button is typically located on the back or side of the motor unit. Refer to your garage door opener’s manual for the precise location and instructions. Once you have located the button, follow these steps:

  1. Press and release the “learn” or “program” button on your garage door opener motor unit. The indicator light on the motor unit will turn on, indicating that it’s ready to learn a new code.
  2. Return to your Hyundai vehicle and sit inside with the doors closed.

Step 3: Program the Garage Door Opener Now it’s time to program the garage door opener in your Hyundai vehicle. Follow these steps:

  1. Press and hold the button you wish to program on your Hyundai vehicle’s overhead console or sun visor. Do not release the button until instructed.
  2. While holding the button, simultaneously press the button on your garage door opener remote control that you want to use to operate the garage door.
  3. Wait for the indicator light on the garage door opener motor unit to flash or hear a click sound. This confirms that the garage door opener has learned the new code.
  4. Release both buttons. Test the programmed button by pressing it once to see if the garage door operates as expected. Repeat the programming process if necessary for additional buttons.

Step 4: Homelink Rolling Code System (If Applicable) Some garage door openers use a rolling code system for added security. If your garage door opener uses this system, additional steps are required. Follow these steps:

  1. After completing Step 3, press and hold the newly programmed button in your Hyundai vehicle.
  2. While holding the button, simultaneously press the “learn” or “program” button on the garage door opener motor unit.
  3. Continue to hold both buttons until the indicator light on the motor unit flashes or you hear a click sound.
  4. Release both buttons. Test the programmed button to ensure it operates the garage door.

Note: For some rolling code systems, you may need to repeat this process a second time to complete the programming.

By following these steps, you should be able to program your Hyundai Acclaim Garage Doors Scottsdale AZ opener successfully. However, if you encounter any difficulties or if the instructions provided here differ from your specific model, it’s recommended to consult your vehicle’s owner’s manual or contact the Hyundai customer support for further assistance.

Acclaim Garage Doors of Scottsdale

7400 E McDonald Dr #122, Scottsdale, AZ 85250, United States

1-480-386-1249