Measuring for Garage Door Repair Ontario CA is a crucial step in ensuring the smooth operation of your garage door. Springs are responsible for counterbalancing the weight of the door, making it easier to open and close.

If you have a broken or worn-out spring, it’s essential to measure accurately to ensure you get the right replacement. In this guide, we’ll walk you through the process of measuring garage door springs in detail.

1. Safety First: Before you begin, ensure your garage door is in the closed position and disconnect the power to your garage door opener. This will prevent any accidental openings or closings during the measurement process.

2. Identify the Type of Spring: There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are located above the garage door, while extension springs are typically found on both sides of the door. Knowing which type you have is essential as they are measured differently.

3. Measure Torsion Springs:

a. Measure the Wire Diameter: Use a caliper or ruler to measure the diameter of the spring wire. Measure at the thickest point for accuracy.

b. Count the Coils: Count the number of coils on the spring. This includes both the active coils (those under tension) and the stationary coils at the ends.

c. Measure the Inside Diameter: Measure the inside diameter of the spring, excluding the coils. Measure from one edge of the coil to the opposite edge.

d. Determine the Length: Measure the length of the spring from one end to the other, including the coils.

4. Measure Extension Springs:

a. Count the Coils: Count the number of coils on one of the springs. This includes both the tightly wound coils and the loosely wound ones.

b. Measure the Unstretched Length: Measure the length of the spring when it’s not under tension, from one end to the other.

c. Determine the Wire Size: Measure the diameter of the spring wire.

5. Check for Additional Information: Some springs may have markings or labels that indicate their specifications, including size and weight capacity. Look for any stamped information on the springs.

6. Consult a Professional: If you’re unsure about measuring the springs or if you encounter any difficulties, it’s best to consult a professional garage door technician. They have the expertise and tools to accurately measure and replace your springs.

7. Order Replacement Springs: Once you have all the measurements, contact a reputable garage door parts supplier or manufacturer. Provide them with the measurements and any additional information you gathered. They will help you select the appropriate replacement springs for your garage door.

8. Installation: Garage door spring replacement is a task best left to professionals due to the high tension involved. Attempting to install or replace springs yourself can be dangerous. Hire a qualified technician to install the new springs safely and ensure your garage door operates correctly.

In conclusion, measuring Garage Door Repair Ontario CA accurately is essential for the safety and functionality of your garage door. Take your time, follow the steps carefully, and when in doubt, seek professional assistance to ensure that your garage door operates smoothly and safely.

Ontario Garage & Overhead Doors

1353 E 7th St, Ontario, CA 91764, United States

1-909-442-4206