As a homeowner, I recently insulated my aluminum garage door and it has made a noticeable difference in the temperature and comfort of my garage.

Here is how I installed the insulation according to Miami Garage Door:

First, I measured the dimensions of each panel on the garage door and chose the right insulation material. I opted for foam board insulation because it is lightweight, easy to cut, and has a high R-value.

Next, I cleaned the surface of the garage door with a mild detergent and water to remove any dirt or debris. After the door was clean and dry, I started installing the insulation.

I used a utility knife to cut the foam board insulation to the correct size and applied a thin layer of adhesive to the back of each panel. Then, I pressed the insulation onto the garage door panel and held it in place for a few seconds to ensure it adhered properly.

Once all the panels were covered with insulation, I used high-quality tape to seal the edges of each panel to the garage door frame. This helped to create an airtight seal and prevent drafts from entering the garage.

To further improve the insulation, I added a garage door insulation kit, which included a special cover that wrapped around the entire door. I followed the manufacturer’s instructions to install the kit, which was a simple process.

After the insulation was installed, I tested the effectiveness by measuring the temperature inside the garage on a cold day. I noticed a significant improvement in the temperature and felt more comfortable in the garage than before.

In conclusion, as per Miami Garage Door, insulating an aluminum garage door is a great way to improve energy efficiency and make your garage more comfortable to use. With the right insulation material and proper installation, you can save on energy costs and enjoy a more comfortable garage space.

Denzel Garage Door of Miami

310 NW 25th St, Miami, FL 33127, United States

786-882-8745