Weather stripping is an essential component of any Garage Door Repair Missouri City TX as it helps to prevent drafts, moisture, and insects from entering your garage. Installing weather stripping on a garage door is a relatively easy process that can be done with basic tools and materials.

In this guide, we will walk you through the steps involved in installing weather stripping on a garage door.

Materials You Will Need:

  • Weather Stripping
  • Scissors
  • Measuring Tape
  • Pencil
  • Utility Knife
  • Clean Cloth
  • Adhesive

Step 1: Measure the Garage Door The first step in installing weather stripping on your garage door is to measure the length of the top and sides of the door. Use a measuring tape to measure the length of each side of the door and the top. Make sure to measure accurately to ensure that you have enough weather stripping for the job.

Step 2: Cut the Weather Stripping to Size Using a pair of scissors or a utility knife, cut the weather stripping to the measured length. It is important to make sure that the weather stripping is cut to the correct size for each side of the garage door.

Step 3: Clean the Surface Before you install the weather stripping, you need to clean the surface of the garage door. Use a clean cloth to wipe down the surface and remove any dirt or debris.

Step 4: Apply Adhesive Apply a thin line of adhesive along the length of the weather stripping. Make sure to apply the adhesive to the side of the weather stripping that will be in contact with the garage door.

Step 5: Install Weather Stripping on the Garage Door Starting at one end of the garage door, press the weather stripping onto the surface of the door. Make sure that the weather stripping is aligned properly with the edge of the door. Gently press down on the weather stripping to ensure that it adheres to the door.

Step 6: Cut the Excess Weather Stripping Once the weather stripping is installed, use a utility knife to trim off any excess weather stripping. Make sure to cut the weather stripping flush with the edge of the garage door.

Step 7: Repeat the Process for the Other Sides Repeat steps 4-6 for the other sides of the garage door. Apply adhesive to the weather stripping, press it onto the door, and cut off any excess.

Step 8: Check for Gaps Once the weather stripping is installed, check for any gaps between the weather stripping and the garage door. If there are any gaps, use a utility knife to trim the weather stripping to fit.

In conclusion, installing weather stripping on a Garage Door Repair Missouri City TX is a simple process that can be completed with basic tools and materials. By following these steps, you can ensure that your garage door is properly sealed, preventing drafts, moisture, and insects from entering your garage.

First Call Garage Door Sugar Land

2865 Dulles Ave, Missouri City, TX 77459, United States

1-281-603-9929