The safety reverse feature on a garage door is an important safety feature that prevents the door from closing if something is blocking the way. If your garage door is not reversing when it encounters an obstacle, it’s important to fix this issue as soon as possible to prevent any potential accidents.

In this article, we will provide you with step-by-step instructions from Garage Door Santa Fe Springs CA on how to fix the safety reverse on your garage door.

Step 1: Check the Photo Eyes

The first step in fixing the safety reverse on your garage door is to check the photo eyes. The photo eyes are located on either side of the garage door, and they are responsible for detecting obstacles in the path of the door. If the photo eyes are dirty, misaligned, or not working properly, the safety reverse feature may not work.

To check the photo eyes, make sure they are clean and free of dirt or debris. If they are dirty, use a soft, dry cloth to gently clean them. If they are misaligned, adjust them until they are properly aligned. If the photo eyes are damaged or not working properly, you will need to replace them.

Step 2: Check the Wiring

The next step is to check the wiring between the photo eyes and the garage door opener motor. Make sure the wires are securely connected and not damaged. If the wiring is damaged, you will need to replace it.

Step 3: Adjust the Force Setting

If the photo eyes and wiring are working properly, the next step is to adjust the force setting on your garage door opener motor. The force setting determines how much force the motor applies when closing the door. If the force setting is too high, the door may not reverse when it encounters an obstacle.

To adjust the force setting, locate the force adjustment screws on your garage door opener motor. Turn the screws clockwise to increase the force setting or counterclockwise to decrease the force setting. Test the door to see if it reverses when it encounters an obstacle. If it still does not reverse, continue to adjust the force setting until the door reverses properly.

Step 4: Test the Door

After making any adjustments to the photo eyes, wiring, or force setting, test the door to ensure that the safety reverse feature is working properly. Place an object in the path of the door and try to close it. The door should reverse when it encounters the obstacle. If the door does not reverse, you may need to adjust the photo eyes, wiring, or force setting further.

Conclusion:

As stated in Garage Door Santa Fe Springs CA, fixing the safety reverse on your garage door is an important task to ensure the safety of your family and belongings. By following these step-by-step instructions, you can check the photo eyes, wiring, and force setting to ensure that your garage door is operating safely. If you encounter any issues or are unsure of what to do, it’s always best to consult a professional garage door technician for assistance. They have the knowledge and tools necessary to safely and effectively repair your garage door safety reverse feature.

Santa Fe Springs Garage Door & Gates

11710 Washington Blvd, Santa Fe Springs, CA 90670

562-203-0740