Aligning Genie Garage Door Repair Houston TX sensors is an important step to ensure proper functioning and safety of your garage door system.

Here are the steps to align the Genie garage door sensors:

  1. Safety First: Before starting any work on your garage door, make sure to disconnect the power supply to avoid any accidents or injuries.
  2. Locate the Sensors: The Genie garage door sensors are usually mounted on the vertical tracks on both sides of the garage door, near the floor. Each sensor consists of an emitter (sending unit) and a receiver (receiving unit). The emitter has a red light, while the receiver has a green light.
  3. Check Sensor Alignment: Look at the alignment of the sensors. The red light on the emitter should be facing the green light on the receiver. If they are misaligned, it can disrupt the signal and prevent the door from closing or opening properly.
  4. Clean the Sensors: Dirt, dust, or debris on the sensors can also interfere with their operation. Clean the lenses of both the emitter and receiver using a soft cloth or a cotton swab and a mild household cleaner. Ensure they are free from any obstructions.
  5. Adjust Sensor Position: Gently loosen the screws or brackets that hold the sensors in place. Adjust the position of the sensors, ensuring they are facing each other directly. Use a level to make sure they are aligned both horizontally and vertically.
  6. Maintain Proper Height: The sensors should be installed at the same height on both sides. Use a measuring tape to ensure that the sensors are mounted at the correct height (usually around 6 inches from the floor). Make any necessary adjustments to achieve the proper height.
  7. Check Alignment Indicator: Some Genie garage door opener models have an alignment indicator on the receiver unit. This indicator helps you determine if the sensors are properly aligned. Follow the instructions provided with your specific model to use the alignment indicator effectively.
  8. Secure the Sensors: Once the sensors are properly aligned, tighten the screws or brackets to secure them in place. Ensure that the sensors do not move or vibrate during the operation of the garage door.
  9. Test the Garage Door: Reconnect the power supply and test the garage door operation. Press the garage door opener button to close the door and observe if it closes smoothly without any issues. If the door doesn’t close or opens immediately after closing, it indicates that the sensors are still misaligned. Repeat the alignment process until the door operates correctly.
  10. Regular Maintenance: To prevent future alignment issues, periodically check the sensors for any dirt, misalignment, or damage. Clean them if necessary and make any adjustments to maintain their proper alignment.

Remember, proper alignment of Genie Garage Door Repair Houston TX sensors is crucial for the safe and efficient operation of your garage door system. If you encounter persistent alignment problems or if you are unsure about any step, it is recommended to consult a professional garage door technician for assistance.

First Call Garage Doors

12505 Memorial Dr #246, Houston, TX 77024, United States

1-713-597-4617