Adjusting garage door springs can be a tricky and potentially dangerous task. Garage door springs are under a significant amount of tension, and if not handled properly, they can cause serious injury or even death. That being said, if you’re comfortable working with tools and have some basic knowledge of garage door mechanics, adjusting the springs on your garage door is a task that you can tackle on your own.

In this article, we’ll go over the steps involved in adjusting garage door springs as stated in Chicago Garage Door.

Step 1: Determine what type of garage door springs you have There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the garage door and wind up and unwind as the door opens and closes. Extension springs are located on either side of the garage door and stretch and contract as the door moves. The process for adjusting these springs differs, so it’s important to know what type of springs you have before you begin.

Step 2: Gather the necessary tools To adjust garage door springs, you’ll need a few basic tools, including a winding bar, pliers, a socket wrench, and a ladder. Make sure you have all of the tools you’ll need before you begin.

Step 3: Release the tension on the springs Before you can adjust the springs, you need to release the tension. This involves disengaging the opener from the door and manually lifting the door until it’s fully open. Once the door is open, secure it in place with clamps or by placing a locking bar across the door.

Step 4: Adjust the torsion springs If you have torsion springs, you’ll need to adjust the tension on the spring using a winding bar. Insert the winding bar into one of the holes in the winding cone, and slowly turn the bar to wind the spring. The amount of turns you need will depend on the weight of the door and the size of the spring. Refer to the manufacturer’s instructions for guidance on how many turns are needed.

Step 5: Adjust the extension springs If you have extension springs, you’ll need to adjust the tension by moving the hooks that are attached to the springs. Use pliers to move the hooks to the next hole on the track to increase tension, or to the previous hole to decrease tension. Make sure you adjust both sides of the door evenly to maintain balance.

Step 6: Test the door Once you’ve adjusted the springs, slowly and carefully test the door to make sure it’s opening and closing smoothly. If the door is uneven or not operating properly, you may need to adjust the springs further or call a professional for assistance.

In summary, as per Chicago Garage Door, adjusting garage door springs can be a challenging task, but with the right tools and knowledge, it’s something that you can do on your own. Remember to always follow safety precautions when working with garage door springs, and if you’re not comfortable with the process, don’t hesitate to call a professional for assistance.

MF Solutions Garage Door Belmont Heights

7406 W Addison St, Chicago, IL 60634

773-917-0753