In this guide, I’ll walk you through the process of adjusting spring tension on a  Garage Door Repair Knoxville TN in covering the tools you’ll need, safety precautions to observe, and step-by-step instructions for adjusting both extension and torsion springs:

Garage Door Installation And Repair At Home. Contractor Man In House

Tools You’ll Need:

Before you begin, gather the following tools:

  1. C-clamps or locking pliers: Used to secure the door in place.
  2. Winding bars: Required for adjusting torsion springs.
  3. Adjustable wrench or socket wrench: For loosening and tightening bolts.
  4. Tape measure: Used to ensure balanced tension adjustment.

Safety Precautions:

Adjusting garage door spring tension can be dangerous, as springs are under high tension and can cause serious injury if mishandled. Follow these safety precautions:

  1. Disconnect power: Unplug the garage door opener and lock out its power source to prevent accidental activation.
  2. Secure the door: Use C-clamps or locking pliers to secure the door in place, preventing it from moving during adjustment.
  3. Wear protective gear: Wear safety glasses and work gloves to protect yourself from potential hazards.

Adjusting Extension Springs:

Extension springs run parallel to the tracks on both sides of the garage door. To adjust tension:

  1. Close the door: Ensure the door is fully closed before beginning adjustment.
  2. Secure the door: Use C-clamps or locking pliers to secure the door in place, preventing it from opening unexpectedly.
  3. Adjust the cable: If necessary, adjust the cable tension by moving the S-hook to a different hole on the track bracket.
  4. Test the door: After making adjustments, test the door to ensure it opens and closes smoothly.

Adjusting Torsion Springs:

Torsion springs are located above the door and wind up to store energy. To adjust tension:

  1. Identify the winding cone: Locate the winding cone at the end of the torsion spring shaft.
  2. Use winding bars: Insert one winding bar into the holes on the winding cone to hold it in place.
  3. Loosen the set screws: Use an adjustable wrench to loosen the set screws on the winding cone.
  4. Adjust tension: To increase tension, insert a second winding bar into the next set of holes on the winding cone and turn it in the direction indicated by the arrow on the cone. To decrease tension, reverse the direction.
  5. Tighten set screws: Once the desired tension is achieved, tighten the set screws securely.
  6. Balance the tension: Repeat the adjustment process on the other side of the door to ensure balanced tension.

Testing and Fine-Tuning:

After adjusting spring tension, perform the following tests to ensure proper operation:

  1. Door balance test: Manually open the door halfway and release it. It should remain in place. If it moves up or down, further adjustment is needed.
  2. Door operation test: Open and close the door several times using both manual and automatic operation to ensure smooth movement.

Additional Tips:

  • Consult a professional: If you’re unsure about adjusting spring tension or encounter difficulties, consult a professional garage door technician for assistance.
  • Regular maintenance: Inspect and lubricate springs regularly to keep them in good condition and prevent premature wear.
  • Safety first: Always prioritize safety when working with garage door springs. If you’re uncomfortable or inexperienced, seek professional help to avoid accidents.

Conclusion:

 Garage Door Repair Knoxville TN If you’re unsure or uncomfortable performing the adjustment yourself, don’t hesitate to seek professional assistance to ensure the job is done safely and effectively.

Camco Commercial Door Company

1-865-776-9455