Garage Outfitters DFW Blog

Local Services in Texas

Month: March 2023 Page 2 of 5

Reasons Why Your Garage Door Opens Very Slow – Reseda Garage Door Experts

By

On March 23, 2023

In Garage Door

If your garage door is opening very slowly, there are several possible causes according to Reseda Garage Door:

  1. Worn out or damaged garage door opener: Over time, the motor in your garage door opener may become worn out or damaged, which can cause it to struggle to lift the weight of the door. If your opener is old or showing signs of wear and tear, it may need to be replaced.
  2. Tension spring needs adjustment: The tension spring is what helps the garage door opener lift the weight of the door. If the tension spring is too loose or too tight, it can cause the door to open slowly. A professional garage door technician can adjust the tension spring for you.
  3. Track needs lubrication: The tracks that guide the garage door up and down can become clogged with debris or dry out over time. This can cause the door to open slowly. Lubricating the tracks with a silicone-based lubricant can help.
  4. Rollers need replacement: The rollers that help the garage door move up and down can become worn out or damaged. If this is the case, they will need to be replaced to ensure smooth operation of the door.
  5. Obstruction in the way of the door: If there is an obstruction in the way of the door, it can cause it to open slowly. Check for anything blocking the door’s path and remove it if necessary.

Overall, as stated in Reseda Garage Door, it’s always best to have a professional garage door technician diagnose and fix the issue to ensure proper and safe operation of the garage door.

Reseda Garage Door Experts

Reseda, CA 91335

818-600-7035

How to Fix Malfunctioning Garage Door Opener? – Denzel’s Garage Door of West Palm Beach

By

On March 22, 2023

In Garage Door

If your garage door opener is malfunctioning, there are a few things you can check before calling a professional garage door repair technician.

Here are the steps from West Palm Beach Garage Door on how to fix a malfunctioning garage door opener:

  1. Check the power source: Make sure the opener is plugged in and the outlet is receiving power. If the outlet is not working, try plugging the opener into a different outlet or resetting the circuit breaker.
  2. Inspect the safety sensors: Check to see if the safety sensors are properly aligned and free from any obstructions. If the sensors are not aligned or obstructed, the opener will not work properly.
  3. Check the remote control: Replace the batteries in the remote control and make sure it is working properly. If the remote is not working, it may need to be reprogrammed or replaced.
  4. Check the wall switch: If the remote control is not working, try operating the opener from the wall switch. If the wall switch is not working, it may need to be replaced.
  5. Check the limit switch: The limit switch determines how far the door opens and closes. If the limit switch is not set correctly, the door may not open or close properly. Adjust the limit switch if necessary.
  6. Check the drive chain or belt: Inspect the drive chain or belt to make sure it is not damaged or loose. Tighten or replace the drive chain or belt as needed.
  7. Check the motor: If all other components are working properly, the motor may be malfunctioning. In this case, it may be best to call a professional garage door repair technician to inspect and repair the motor.

Lastly, as per West Palm Beach Garage Door, if these steps do not resolve the issue, it is best to call a professional garage door repair technician to diagnose and fix the problem. Garage door openers can be complex and dangerous to work on, and attempting to repair it without proper knowledge and tools may lead to further damage or injury.

Denzel’s Garage Door of West Palm Beach

700 S Rosemary Ave Ste 100, West Palm Beach, FL 33401

561-220-1737

How Much Do Garage Door Springs Cost – Lakewood Garage Door Repair

By

On March 21, 2023

In Garage Door

Garage Door Repair Lakewood OH springs are an essential component of a garage door system, providing the necessary force to open and close the door. When they break or wear out, they need to be replaced to ensure the safety and functionality of the door.

The cost of Garage Door Repair Lakewood OH springs can vary depending on several factors, such as the type of spring, the size of the door, and the brand. In general, the cost of garage door springs can range from $50 to $300.

There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are typically more expensive than extension springs because they are more durable and can last longer. The cost of torsion springs can range from $75 to $200 per spring, while extension springs can cost between $50 to $100 per spring.

The size of the garage door can also affect the cost of springs. Larger doors require stronger springs, which can be more expensive. Additionally, if the garage door is an odd size or requires a custom spring, the cost can be higher.

The brand of the spring can also impact the cost. Some brands are known for their quality and durability and may cost more than lesser-known brands. However, investing in a higher-quality spring can save you money in the long run by reducing the need for frequent replacements.

It’s important to note that the cost of garage door springs is only one part of the total cost of a garage door repair. Hiring a professional to install the springs can add to the cost, as can the cost of any additional repairs or replacements needed for other parts of the door system.

In conclusion, the cost of garage door springs can vary widely depending on the type, size, and brand. It’s essential to choose a high-quality spring that is appropriate for your garage door to ensure safety and longevity. Consulting with a professional can help you determine the best option for your specific needs and budget.

Lakewood Garage Door Repair

1433 Arthur Ave #7, Lakewood, OH 44107, United States

1-216-510-9359

How To Program Garage Door Opener In Car – Premier Garage Door Repair

By

On March 21, 2023

In Garage Door

Programming a Garage Door Repair Parma OH opener in a car can seem like a daunting task, but it can actually be a straightforward process. The exact steps will vary depending on the make and model of your car and garage door opener, but the general process involves locating the programming button on your garage door opener, pressing it, and then pressing a corresponding button in your car.

Here is a more detailed guide to programming a Garage Door Repair Parma OH opener in a car.

  1. Check compatibility: First, check that your garage door opener is compatible with your car. Your car’s owner’s manual should provide information on which garage door openers are compatible with your car’s built-in remote system. You can also check the manufacturer’s website or call their customer service line to confirm compatibility.
  2. Find the programming button on your garage door opener: Look for the “Learn” or “Program” button on your garage door opener. This button is usually located on the back or side of the motor unit, and it may be labeled differently depending on the manufacturer. If you’re having trouble finding it, consult your garage door opener’s manual or the manufacturer’s website.
  3. Clear any existing codes: If you’re programming a new garage door opener or replacing an existing one, you’ll need to clear any existing codes on your car’s remote system. This can usually be done by holding down the two outside buttons on your car’s remote system until the LED light blinks rapidly. Consult your car’s owner’s manual for specific instructions.
  4. Activate programming mode on your garage door opener: Press and release the programming button on your garage door opener. The LED light on the motor unit should start flashing or remain steady, indicating that the opener is now in programming mode.
  5. Program your car’s remote system: Within 30 seconds of pressing the programming button on your garage door opener, press and hold the button you want to use to operate the garage door on your car’s remote system. Hold the button until the LED light on the motor unit flashes, indicating that the garage door opener has accepted the new code. Repeat this step for any additional buttons you want to program.
  6. Test the garage door opener: Once you’ve programmed the remote system in your car, test the garage door opener to make sure it’s working properly. Stand outside your garage and press the button you programmed in your car. The garage door should open or close as expected.
  7. Repeat the process for additional cars: If you have multiple cars that need to be programmed to the garage door opener, repeat the process for each car.

Additional Tips:

  • Make sure the car is parked in the garage when programming the opener.
  • If you’re having trouble programming the opener, try resetting both the garage door opener and the car’s remote system and starting over.
  • Keep in mind that the exact steps for programming your car’s remote system may vary depending on the make and model of your car. Consult your car’s owner’s manual for specific instructions.

In summary, programming a garage door opener in a car can be a relatively simple process. By following the steps outlined above and consulting your car’s owner’s manual and the garage door opener’s manual, you should be able to program your car’s remote system to operate the garage door opener in no time.

Premier Garage Door Repair

440-762-6587

How to Fix Safety Reverse on Garage Door – Santa Fe Springs Garage Door & Gates

By

On March 21, 2023

In Garage Door

The safety reverse feature on a garage door is an important safety feature that prevents the door from closing if something is blocking the way. If your garage door is not reversing when it encounters an obstacle, it’s important to fix this issue as soon as possible to prevent any potential accidents.

In this article, we will provide you with step-by-step instructions from Garage Door Santa Fe Springs CA on how to fix the safety reverse on your garage door.

Step 1: Check the Photo Eyes

The first step in fixing the safety reverse on your garage door is to check the photo eyes. The photo eyes are located on either side of the garage door, and they are responsible for detecting obstacles in the path of the door. If the photo eyes are dirty, misaligned, or not working properly, the safety reverse feature may not work.

To check the photo eyes, make sure they are clean and free of dirt or debris. If they are dirty, use a soft, dry cloth to gently clean them. If they are misaligned, adjust them until they are properly aligned. If the photo eyes are damaged or not working properly, you will need to replace them.

Step 2: Check the Wiring

The next step is to check the wiring between the photo eyes and the garage door opener motor. Make sure the wires are securely connected and not damaged. If the wiring is damaged, you will need to replace it.

Step 3: Adjust the Force Setting

If the photo eyes and wiring are working properly, the next step is to adjust the force setting on your garage door opener motor. The force setting determines how much force the motor applies when closing the door. If the force setting is too high, the door may not reverse when it encounters an obstacle.

To adjust the force setting, locate the force adjustment screws on your garage door opener motor. Turn the screws clockwise to increase the force setting or counterclockwise to decrease the force setting. Test the door to see if it reverses when it encounters an obstacle. If it still does not reverse, continue to adjust the force setting until the door reverses properly.

Step 4: Test the Door

After making any adjustments to the photo eyes, wiring, or force setting, test the door to ensure that the safety reverse feature is working properly. Place an object in the path of the door and try to close it. The door should reverse when it encounters the obstacle. If the door does not reverse, you may need to adjust the photo eyes, wiring, or force setting further.

Conclusion:

As stated in Garage Door Santa Fe Springs CA, fixing the safety reverse on your garage door is an important task to ensure the safety of your family and belongings. By following these step-by-step instructions, you can check the photo eyes, wiring, and force setting to ensure that your garage door is operating safely. If you encounter any issues or are unsure of what to do, it’s always best to consult a professional garage door technician for assistance. They have the knowledge and tools necessary to safely and effectively repair your garage door safety reverse feature.

Santa Fe Springs Garage Door & Gates

11710 Washington Blvd, Santa Fe Springs, CA 90670

562-203-0740

How to Fix Garage Door Cable Broke – Sherman Oaks Garage Door & Gates

By

On March 21, 2023

In Garage Door

If your garage door cable has broken, it is important to fix it as soon as possible to avoid further damage and ensure the safety of your family and property.

Here are the steps from Garage Door Sherman Oaks CA that you can follow to fix a garage door cable that has broken:

If my garage door cable has broken, the first thing I would do is disconnect the power supply to the garage door opener to ensure my safety while working on the door. Next, I would open the garage door fully to release the tension on the broken cable and secure the door in the open position using clamps or vice grips.

Then, I would locate the broken cable and remove it from the drum and bottom bracket using pliers. Once the broken cable is removed, I would install the new cable by threading it through the spring and attaching it to the bottom bracket. After installing the new cable, I would wind the cable onto the drum, ensuring that it is properly aligned and under tension.

To wind the spring, I would use a winding bar and follow the manufacturer’s instructions. After winding the spring, I would test the garage door by opening and closing it to ensure that it’s working correctly. If the door is not working properly, I would adjust the tension on the spring or cable.

If I have more than one cable that needs to be replaced, I would repeat the process for each one until all cables are in good working order. Lastly, I would lubricate the cables and hardware to prevent future issues with my garage door. I would apply a lubricant specifically designed for garage doors to the cables and hardware.

In conclusion, as stated in Garage Door Sherman Oaks CA, fixing a garage door cable that has broken involves removing the broken cable, installing a new cable, winding the spring, and testing the door. By following these steps and keeping the cables and hardware lubricated, I can prevent future issues with my garage door. If I encounter any issues during the process, I would contact a professional garage door repair technician for assistance.

Sherman Oaks Garage Door & Gates

14702 Ventura Blvd, Sherman Oaks, CA 91403

310-361-6378

7 Steps to Realign Garage Door Sensors – Denzels Garage Doors

By

On March 20, 2023

In Garage Door

Garage door sensors play a crucial role in ensuring the safety of your garage door. If your garage door sensors are not aligned correctly, your garage door may not function properly and may pose a safety hazard.

Here are the steps to follow from Garage Door Repair Marina del Rey CA to realign your garage door sensors:

Step 1: Check the Sensors

The first thing you need to do is check the sensors to make sure they are clean and free of any debris or dirt. Sometimes, debris can accumulate on the sensors, causing them to malfunction. Clean the sensors using a soft cloth and ensure that there is nothing blocking their path.

Step 2: Check the Alignment

Once you have cleaned the sensors, check the alignment. The sensors should be aligned with each other, and there should be no obstructions in their path. If the sensors are not aligned correctly, you can use the following steps to realign them:

Step 3: Adjust the Sensor Brackets

Each sensor is mounted on a bracket that can be adjusted to align the sensors properly. Locate the bracket on each sensor and loosen the screws that hold the bracket in place using a screwdriver. Make sure to adjust both brackets to ensure that the sensors are aligned with each other.

Step 4: Align the Sensors

Use a string or laser level to align the sensors. Place the string or level between the two sensors at the same height, making sure that they are level with each other. Adjust the sensor brackets until the string or level is level, and the sensors are aligned with each other.

Step 5: Tighten the Screws

Once you have aligned the sensors, tighten the screws that hold the sensor brackets in place using a screwdriver. Make sure to tighten the screws securely to ensure that the brackets do not move out of alignment.

Step 6: Check the Alignment

Check the alignment of the sensors again to make sure that they are still aligned correctly. Make any necessary adjustments until the sensors are perfectly aligned with each other.

Step 7: Test the Garage Door

Test the garage door to make sure that it is functioning correctly. Stand near the garage door and press the button to close the door. If the sensors are aligned correctly, the garage door should close without any issues. If the sensors are not aligned, the garage door may stop or reverse direction.

In conclusion, based from Garage Door Repair Marina del Rey CA, realigning garage door sensors is a simple process that can be done with a few basic tools and some patience. By following these steps, you can ensure that your garage door sensors are aligned correctly and that your garage door is safe to use. If you are unsure about the alignment of your garage door sensors or need assistance, it is best to consult with a professional.

Denzels Garage Doors

Marina del Rey, California

619-496-9419

How to Tighten Your Garage Door Chain – Hermosa Beach Garage Door Experts

By

On March 20, 2023

In Garage Door

A garage door chain is an essential component of the garage door opener, which is responsible for lifting and lowering the garage door. Over time, the chain can become loose, which can cause the garage door to operate poorly or not operate at all. Tightening a garage door chain is a relatively simple process that can be done with just a few tools and some basic knowledge.

In this article, we will provide a step-by-step guide from Garage Door Repair Redondo Beach CA on how to tighten a garage door chain.

Before we begin, it is important to note that garage door chain tension should be adjusted periodically, especially if you notice that the chain is loose or if the garage door is not functioning properly. A loose chain can cause excessive wear and tear on the garage door opener motor, which can lead to costly repairs down the line. Regular maintenance of the garage door chain is essential to ensure the safe and efficient operation of your garage door.

Step 1: Disconnect the power

The first step in tightening a garage door chain is to disconnect the power to the garage door opener. This is a crucial step to ensure that there is no risk of the garage door accidentally opening or closing during the repair process. To disconnect the power, locate the power cord of the garage door opener and unplug it from the outlet. If your garage door opener is hardwired, turn off the circuit breaker that supplies power to the garage door opener.

Step 2: Locate the chain tension adjustment mechanism

The next step is to locate the chain tension adjustment mechanism. This is usually located at the end of the garage door opener where the chain attaches to the trolley. The tension adjustment mechanism can be a nut or bolt that is used to adjust the tension of the chain.

Step 3: Loosen the nuts or bolts

Using a wrench, loosen the nuts or bolts that hold the tension adjustment mechanism in place. Do not remove the nuts or bolts completely, as you will need them to adjust the tension of the chain later.

Step 4: Tighten the chain

Once the nuts or bolts are loose, use a screwdriver to turn the tension adjustment mechanism clockwise to tighten the chain. You should only turn the adjustment mechanism a quarter turn at a time to avoid over-tightening the chain. After each quarter turn, check the tension of the chain by pulling on it with your hand. The chain should be tight, but there should be a little bit of slack. If the chain is too tight, it can cause excessive wear and tear on the garage door opener motor.

Step 5: Tighten the nuts or bolts

Once the chain is tightened to the desired tension, use a wrench to tighten the nuts or bolts that hold the tension adjustment mechanism in place. Make sure that the mechanism is secured tightly, as a loose mechanism can cause the chain to become loose again over time.

Step 6: Reconnect the power

After tightening the chain and securing the tension adjustment mechanism, plug the power cord back into the outlet or turn the circuit breaker back on if your garage door opener is hardwired. Once the power is restored, test the garage door to ensure that it is functioning properly.

In conclusion, as stated in Garage Door Repair Redondo Beach CA, tightening a garage door chain is a simple process that can be done with just a few tools and some basic knowledge. By following these six steps, you can tighten the chain of your garage door and ensure its safe and efficient operation. Remember to periodically check the tension of the garage door chain to avoid costly repairs down the line.

Hermosa Beach Garage Door Experts

417 N Pacific Coast Hwy #26, Redondo Beach, CA 90277, United States

310-340-6130

How To Open Garage Door When Power Is Out – Saginaw Best Garage & Overhead Doors

By

On March 16, 2023

In Garage Door

Opening a Garage Door Repair Saginaw TX during a power outage can be challenging, but there are a few options available that can help you access your garage even when the power is out.

Here are some ways to open a Garage Door Repair Saginaw TX during a power outage:

  1. Manual Release Mechanism

Most garage doors have a manual release mechanism that allows you to disengage the door from the opener and open it manually. Look for a cord or handle hanging from the garage door opener mechanism. Pull down on the cord or handle to disengage the opener from the door. Then, manually lift the door by its handle or from the bottom edge. This method may require some physical effort, but it is the most straightforward and reliable way to open the garage door without power.

  1. Battery Backup

If you have a garage door opener with a battery backup feature, you can use it to open the door during a power outage. The battery backup will automatically kick in when the power goes out, and you can use the wall switch or remote to operate the door as usual. However, keep in mind that the battery backup may only last for a limited time, so you should try to conserve its power as much as possible.

  1. Use a Generator

Another option to open your garage door during a power outage is to use a portable generator. A generator can power your garage door opener, allowing you to open and close the door without any issues. However, this method requires a bit of setup, and you will need to have a generator on hand and know how to use it safely.

  1. Use a Solar-Powered System

If you live in an area with frequent power outages, you may want to consider installing a solar-powered garage door opener. These systems use solar panels to generate electricity, which is stored in batteries and used to power the garage door opener. This way, you can open and close your garage door even when the power is out, without worrying about the battery backup running out of power.

  1. Use a Hand-Cranked System

If you don’t have a manual release mechanism or battery backup, you can also consider installing a hand-cranked system. This type of system is designed to allow you to manually operate your garage door using a hand-crank. It may take some time and effort to open and close the door, but it can be a reliable option if other methods are not available.

In conclusion, there are several ways to open a garage door during a power outage, including using a manual release mechanism, a battery backup, a generator, a solar-powered system, or a hand-cranked system. Regardless of which method you choose, it’s important to prioritize safety and ensure that you follow the manufacturer’s instructions to avoid any accidents or damage to your garage door.

Saginaw Best Garage & Overhead Doors

1029 N Saginaw Blvd #26, Saginaw, TX 76179, United States

1-940-532-8593

How to Program a Clicker Garage Door Opener – OXR Overhead Garage Doors

By

On March 16, 2023

In Uncategorized

Programming a Clicker garage door opener is a straightforward process that requires a few simple steps.

Here’s a step-by-step guide from Garage Door Repair Oxnard CA on how to program your Clicker garage door opener:

Materials you will need:

  • Clicker garage door opener
  • Step ladder (if needed)

Step 1: Clear the Memory If you have previously programmed the Clicker garage door opener to a different door or frequency, it is essential to clear the memory before starting the programming process. To do this, press and hold the “learn” button on the back of the Clicker garage door opener until the LED light turns off.

Step 2: Determine the Frequency Next, you need to determine the frequency of your garage door opener. Look at the back of your garage door opener motor unit, and you should see a label indicating the frequency. It could be either 315MHz or 390MHz.

Step 3: Set the Code Switches Once you know the frequency of your garage door opener, set the code switches on the back of the Clicker garage door opener to match the frequency. If your garage door opener uses 315MHz frequency, set the code switches to the “ON” position. If your garage door opener uses 390MHz frequency, set the code switches to the “OFF” position.

Step 4: Program the Clicker Garage Door Opener To program the Clicker garage door opener, stand close to the garage door opener motor unit with the Clicker garage door opener in hand. Press and release the “learn” button on the back of the garage door opener motor unit. You should see an LED light on the motor unit flash.

Next, press and hold the button on the Clicker garage door opener that you want to program. The LED light on the garage door opener motor unit will flash again, indicating that the programming is successful.

Step 5: Test the Clicker Garage Door Opener To test the Clicker garage door opener, stand clear of the garage door and press the button you just programmed on the Clicker garage door opener. The garage door should open or close, depending on the button you pressed.

That’s it! With these steps from Garage Door Repair Oxnard CA, you can easily program your Clicker garage door opener and start using it to operate your garage door. If you encounter any issues during the programming process, refer to the instruction manual that came with the Clicker garage door opener or contact the manufacturer for assistance.

OXR Overhead Garage Doors

1301 Seabridge Ln #3, Oxnard, CA 93035, United States

805-800-8965

Page 2 of 5

Previous

Next

Powered by WordPress & Theme by Anders Norén